Altocraft 240-2087 Manuel de l'opérateur télécharger pdf (Page 4)

SPECIFICATIONS

=

Voltage: 120 volts AC, 60Hz.

=

Current rating: 10 amps

=

No-load speed: 4800 rpm

=

8-1/4” (210mm) 24 tooth carbide tipped saw blade

=

5/8” (16mm) arbor

=

Bevel cuts up to 45° left

=

Miter cuts up to 45° left & right

with detents at 0°, 15°, 22.5°, 30°, & 45° left and right

Included

1 dust bag

1 blade wrench

2 table side extensions

1 hold-down clamp

FUNCTIONAL DESCRIPTION

Switch

Brush cover

Saw blade

Dust bag

Bevel lock lever

Movable guard

Tab

le extension

10.

11.

Handle

Miter scale

Hold-down clamp assembly

Tab

le extension lock screw

ALWAYS USE TABLE EXTENSIONS AND CLAMPS

to support the material

when sawing long work pieces.

THE MATERIAL SHOULD BE PLACED FIRMLY AGAINST THE FENCE AND

TABLE. The turning of the saw blade should force it down against the table

and rearward against the fence during the cut. Movement of the workpiece

during the cut may cause the blade jam and create a kickback. When this

happens, the cutting head may jump out of your hand or the workpiece may

fly loose and cause serious injury.

10. DO NOT START THE SAW WITH THE BLADE IN CONTACT WITH ANY

SURFACE.

This may cause the saw to bounce or kick back violently and could

cause injury.

11.

IF MAKING A CUT USING ONE HAND TO HOLD THE SAW,

ensure the free

hand is clear of the cutting area.

SAFETY PRECAUTIONS FOR COMPOUND MITER SAW

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire

Altocraft 240-2087 Manuel de l'opérateur Page 4

Commentaires sur ces manuels